|
COAL
& COKE TESTING INSTRUMENTS With
Digital Beckman thermometer for finding out the Calorific value of Coal,
coke, etc. Complete with 25 essential accessories with
factory test
certificate for Bomb. Also available With
Printer Models. Also available additional accessories like
Oxygen empty Gas cylinder with factory
and Ministry of Explosive certificates, Two stage pressure regulator for inlet
and out going pressure. For
finding out the gas flow rate, with SS measuring drum enclosed in a
stainless steel tight casing prevents corrosion, SS gas inlet and outlet
nozzles with SS sheathed thermometer, spirit level. The volume of gas
passed through the meter is indicated in the front dial in litres.
Revolution counter is provided for indication of total volume. Available
capacities : 1, 3, 10, 25 and 50 litres. DRY GAS FLOW METER- For High Pressure 2" W.G. to 3
Kg/cm2 The
Calorimeter, pressure governor, non-recording Gas Flow meter in which
calorific value is ascertained from the rise of temperature imparted to a
measured quantity of gas. Range 1000-26000 Kcal/m2 , 120 300
BThu/C.ft. Consists of calorimeter, pressure governor, non-recording
1-litre flow meter and is supplied with 2 litres and 50 ml measuring jars,
3 Thermometers and flexible tubing. For
speeding up crushing of aggregates, ores, minerals, coal, coke, ceramic
and other similar materials. Jaw size : 100 * 150 mm, max. size of feed :
50 mm (approx.), Product discharge size : 5 mm to 15 mm,
capacity 100 to 200 kg (Based upon material). Complete with 3 HP motor,
starter, V-belt, pulley drive and mounting for 440V, 50 Hz AC mains. HARDGROOVE GRINDABILITY TESTER As
per IS : 4433/1967. It is a miniature pulveriser employing the ball
bearing principles of grinding. Supplied with automatic revolution
counter, weights and built-in reduction gear. Wired for 240V, single
phase, 50 Hz. AC mains. ROLL CRUSHER LABORATORY MODEL For
crushing different ore samples and minerals. Roll size : dia 200 mm and
length of rolls 100 mm. Feed size 8 mm, product size 1 to 2 mm. For 440 V,
50 Hz, 3 phase AC. MINERAL JIG LABORATORY MODEL Stroke
length is variable between 0 to Ύ at 400 rpm approx. size of screen
compartment 4 * 6, complete with a mild steel stand structure driven
by ½ HP 200 V AC motor and one 8 mesh screen and one trash screen for
the screen box along with starter. Internal
dia. 18 * 18 long, opening of 150 mm width and 350 mm long (approx.) speed
of rotation is 56 ± 2 RPM. 12 Nos. of 1 Ό dia. Steel balls are
supplied with the unit. For 440 V, 50 Hz AC, 3 phase operation. PULVERISER LABORATORY MODEL (6 MINI MILL) Designed
for powdering lab model Rotor with beaters mounted on shaft direct coupled
with 1 HP 3 phase, 440V, 50 Hz AC. With screen and cotton bag. Designed
for powdering lab coal samples to 72/100 mesh. For
coal and coke as per IS : 1250. Consists of carbon & Hydrogen
Analyser, Volatile matter determining furnace, Ash determination furnace,
Moisture determination Oven. COAL REACTIVITY INDEX
This
is specially designed for the determination of reactivity of coal where
the temperature required does not exceed 1050°C. Comprising of Tubular
furnace, with control panel, carbon dioxide cylinder, Orsat apparatus, Gas
retaining vessel. PYROMETRIC CONE EQUIVALENT DETERMINATOR Specificaally
designed to determine the softening point of refractory materials
generally as per IS : 1528 1980. This test specimen cones prepared
from refractory material under test with standard pyrometric cones heated
in a specially designed coke bed furnace. RUL (REFRACTORY UNDER LOAD) TESTING EQIPMENT This
is specially designed for determine the softening point of refractory
materials generally as per IS : 1538-1973 (Part-II). This test determines
the softening temperature of refractories under load indicated either by
complete sloughing down or breaking of the test specimen. The equipment
comprising of Vertical tubular coke bed heated resistance type, High
temperature furnace, Air cooled continuously varialbe Auto Transformer,
Loading arrangement & pillar frame work and Electronic instrumentation
system. MUFFLE FURNACE HIGH TEMPERATURE ELECTRIC With
Digital temperature indicating-cum-controller, thermocouple, air break
magnetic contactor, fuse. Maximum temperature upto 1400°C and regular
recommended temp. not to exceed 1300°C. Available in various sizes. SHAKER SCREENS ROTA SCREEN ELECTROMAGNETIC SCREENS VIBRATORY FEEDER (ELECTROMAGNETIC TYPE) MAGNETIC SEPARATORS (ELECTROMAGNETIC TYPE) MAGNETIC SEPARATORS (PERMANENT MAGNET TYPE) MAGNETIC DRUM MAGNETIC PULLEY COOLANT SEPARATOR GRATE MAGNET TRIPLE ROLL MASS MILLING MACHINES.
|